Corrugated Machines

Corrugated Machines

February 01, 2020

List of Semi Automatic Corrugated Box Making Plant

Corrugation Machine
This machine can be applied for lamination of cardboard to cardboard, cardboard to corrugation paperboard. A, B, C, D, E, F, flute corrugation paperboard can be applied.
Auto Sheet Cutter Machine
It is perfectly built and designed to increase production and fine cutting of 2 ply board without damaging the flutes of the board as well as plain paper. Size 42-95 inch

 Sheet Pasting Machine

This machine mainly constitutes three rolls viz glue applicator, glue doctor & a feed roll. The large applicator roll revolving in the Glue carries the adhesive, layered evenly by the doctor roll behind, to the crests of the paper flute. A third roll, which rotates freely, is suspended over the glue applicator roll for feeding of the board The gap between the rolls is adjustable. The glue pan can be raised or lowered to adjust the glue level. The glue can be completely drained when the pan plugs are removed.

Four Bar Rotary Cutting Creasing Machine
The 4-Bar Rotary Cutting & Creasing Machine consists of two pairs of shafts. The pair directly adjacent to the feed table carries the cutting dies & the second pair carries the creasing dies. Both cutting & creasing dies are made in two halves bolted together, for easy removal from the shafts. The two lower shafts can be raised or lowered by means of a hand-wheel provided on the back side depending upon the thickness of the board (3ply. 5ply, 7ply, or 9ply boards) separate gauge of creasers can be used. The sheets are piled on the feed table & fed through the machine by hand. Two guides are provided on the table to support the sheet for straight feeding.

Eccentric Slotting Machine
The next process after cutting & creasing of the sheet is slotting & corner cutting. It is simultaneously done over the eccentric slotter machine. Slot dies are mounted on an eccentric shaft which causes them to move in an arc so that the board is slotted in a shearing manner. The corner die is moved, likewise. The sheets are fed through the machine by hand. Due to its rugged construction, it can take up a number of sheets in one stroke. The dies can be moved on the machine very easily & the slot depth can be adjusted by the gauge provided along with it. Two guides are provided on the feed table, to support the sheets at the correct dimension and feeding.
Box Stitching Machine
This is a precise machine with accuracy & standardization. The common sizes are 36″, 42″ & 46″. It comes in two models- angular & straight, having the capacity of 300 stitches per minute.
Board Cutter Machine
Board Cutter Machine is available in different sizes. The paper of corrugated roll is mounted on the real stand and cut into sheets by unwinding. It can also be placed, next to corrugating machine for direct cutting the board into sheets
Sheet Pressing Machine
Sheet Pressing Machine is available in different sizes.. The wet glued sheets are piled over the lower plate. Optimum pressure is applied by lowering the upper moving plate when switched on.

About

Period.

Next
« Prev Post
Previous
Next Post »
Subscribe to: Post Comments (Atom)